Storage Tanks
Storage Tanks are vessels used for holding raw materials, intermediates, finished products, solvents, water, oils, or chemicals. They are designed for atmospheric or pressurized operation depending on process needs.
Available in Mild Steel (MS) or Stainless Steel (SS304/316/316L), these tanks can be vertical, horizontal, flat/ conical bottom, and with or without insulation and heating systems.
Storage Tanks — Specifications
| Material of Construction | MS IS 2062 Gr. A/B |
| Capacity Range | 500 L to 200 KL (Custom built up to Larger Capacities) |
| Tank Orientation | Vertical or Horizontal |
| Design Pressure | Atmospheric (0 kg/cm²) or Low Pressure up to 1–2 kg/cm² |
| Design Temperature | Ambient to 100–150°C |
| Bottom Type | Flat Bottom / Conical / Dished |
| Finish (External) | Red Oxide Primer + Enamel/PU paint |
| Coating (Optional) | FRP Lining, Epoxy Lining, Rubber Lining for Chemical Resistance |
| Supports | MS Legs, Saddle, or Skirt |
| Nozzles | Manhole, Inlet, Outlet, Drain, Vent, Level Indicator, Sampling Port |
| Testing | Hydro Test, Leakage Test |
| Material of Construction | SS304/304L or SS316/316L |
| Capacity Range | 200 L to 150 KL (Custom) |
| Design Pressure | Atmospheric to 3–5 kg/cm² (as required) |
| Design Temperature | -20°C to 200°C |
| Internal Finish | Buffed/Mirror Finish (Ra 0.4–0.8 μm for Pharma) |
| External Finish | Matt or Mirror Finish |
| Bottom Type | Conical / Dished / Flat Bottom |
| Insulation (Optional) | Mineral Wool/Rockwool + SS Cladding |
| Heating/Cooling (Optional) | SS Jacket or Dimple Jacket |
| Supports | SS legs, Skirt, or Saddle |
| Nozzles | Manhole, Inlet, Outlet, Drain, Vent, Level Indicator, Sampling Port |
| Testing | Hydro Test, Dye Penetrant Test, Passivation |
| Compliance | ASME / GMP / FDA (Pharma Grade) |
Industry Applications
Where Storage Tanks is commonly used
More in Process Equipment
Explore other products in this category
Reactors (MS/SS)
MS (Mild Steel) Reactors MS reactors are process vessels manufactured from mild steel, used where corrosion is low and cost-effective equipment is required. They are strong, durable, and suitable for general chemical processing, mixing, heating, and cooling operations. Often used with internal/external coatings (e.g., rubber-lined, epoxy-lined) when handling corrosive chemicals. SS (Stainless Steel) Reactors SS reactors are made from corrosion-resistant stainless steel grades (SS304, SS316/316L). They are widely used in pharmaceuticals, foods, cosmetics, biochemical and high-purity applications. They can withstand aggressive chemicals, high temperatures, and allow sanitary operations.
Receivers
Receivers are storage or collection vessels used for holding, transferring, or temporarily storing liquids, solvents, vapors, or process fluids. They are installed downstream or upstream of reactors, centrifuges, dryers, filters, distillation columns, and vacuum systems.These vessels may be atmospheric or pressurized, and are available in MS, SS304, SS316, or other material grades depending on chemical compatibility. Functions of Receivers: Collect liquid or condensate from a process Act as buffer/storage tanks Maintain steady flow to pumps or downstream equipment Handle vacuum or pressure conditions Collect product during batch or continuous processing
Heat Exchangers
Heat Exchangers are devices designed to transfer heat between two fluids either liquids, vapours, or gases without mixing them. They play a crucial role in heating, cooling, condensation, evaporation, and energy recovery processes. The most common industrial type is the Shell & Tube Heat Exchanger, available in Mild Steel (MS) for general industrial use and Stainless Steel (SS304/316/316L) for corrosive or sanitary applications.
Static Equipment
Static equipment are fixed process units that perform functions such as storage, heating, cooling, phase separation, pressure containment, and fluid handling without any rotating components. These include vessels, tanks, heat exchangers, columns, and structural process equipment. They are designed according to ASME/IS/API standards depending on service requirements.